ExtendedWarrantyGroup

The Better Way to Protect Your Major Appliances

  
#

Maintenance Tips

Dryers

Problem: Dryer will not start at all.
Possible Cause
Possible Solution
The dryer is not getting any power. Check the power cord to the unit.
The dryer is not getting any power. Check the breaker and reset if needed.
The door is not closed securely. Make sure the door is closed securely.
Problem: The Dryer runs but does not heat (spins but does not dry).
Possible Cause
Possible Solution
The lint trap needs to be cleaned. Clean the lint trap.
There is a power problem (low voltage). Reset the breaker (a 220/240 volt breaker can trip only half of the circuit so a dryer will still run but there is not enough voltage to turn the heater on at the same time).

The appliance maintenance suggestions and tips are only offered as suggestions. If you are not comfortable or do not have the appropriate background, knowledge, or skills to safely and correctly execute any of the "maintenance suggestions" then do not attempt to follow the maintenance suggestions or tips. Call a qualified service technician. All Six Warranty disclaims any and all responsibility and liability for any injuries, damages or liabilities that may arise out of any application or implementation, or reliance upon, these "maintenance suggestions and tips.

Online Payment Solution

Exclusions and limitations apply. See terms and conditions for details. All Six Warranty coverage is provided and administered by National Product Care Company; or Service Saver, Inc.; or Service Plan, Inc depending on your state of residence. All listed companies are located at 175 W Jackson Blvd. Chicago, IL 60604. Form Reference GEN-NAT-APL-DEC.